CORSA Performance

HOW TO MEASURE YOUR BOAT FOR EXHAUST SYSTEMS

The following diagrams illustrate the measurements we will need from you when ordering thru-hull exhaust components such as diverters or complete muffler systems. To make ordering easier, also have the following information ready when you call: Your boat year, make and model, engine size, (Mercury, Volvo, OMC), drive model and is it an EFI or carbureted engine.

If you have any questions please call a CORSA Performance sales representative at 800-486-0999.

Under Swim Platform Applications

For boats with built in or bolt-on swim platforms that DO NOT currently have thru-hull exhaust, the following measurements will determine if there is enough space under the swim platform to install a standard system or if a custom system will be required.

A. Distance measured from the vertical center line of the drive (gimbal) housing to the upper corner of the drive cavity. For bolt-on swim platforms, measure the distance to the first mounting bracket (See diagram below).

B. Distance measured from the top of the drive (gimbal) housing to the underside of the swim platform (See diagram below).

* Also applies to Twin Engine applications.

NOTE: When measuring distances on a built in swim platform, measure to the tangent of the radius as shown in the illustration.

Location of Existing Exhaust Holes

For boats that currently DO HAVE thru-hull exhaust, the following measurements will determine if the exhaust holes are in the standard location for your particular motor or if a custom system will be needed to meet the existing exhaust holes (See diagram below).

X. Distance measured from the vertical center line of the drive (gimbal) housing to the vertical center line of the exhaust hole.

Y. Distance measured from the top of the drive (gimbal) housing to the horizontal center line of the exhaust hole (See diagram below).

* Also applies to Twin Engine applications.